All-In-One Hybrid Energy Storage System (ESS) , designed to revolutionize your energy management experience. With a powerful rated power of 60KW and an impressive storage capacity of 101KWh, this state-of-the-art system is perfect for high-rate cyclic charging and discharging scenarios.
Inventronics Air-Cooled C&I Energy Storage System delivers cost-effective, reliable energy storage for commercial and industrial sites. Featuring proven air-cooling thermal management, modular cabinet architecture and flexible BMS/PCS integration, it’s ideal for peak shaving, backup power and EV charger load management.
Product Features
All-in-one Design
Secure System/Safety
Application Flexibility
Easy Maintenance
Technical Specification
The Air-cooled Commercial & Industrial ESS Energy Supply Cabinet series is specifically designed energy storage systems for industrial and commercial applications, including factories, industrial parks, commercial buildings, charging stations, and data centers. This product series primarily comprises battery packs, power conversion systems (PCS), thermal management systems (TMS), fire fighting systems (FFS), and battery management systems (BMS). Through the energy management system's control strategies, functions such as energy capacity expansion, energy arbitrage, and solar power integration can be effectively achieved.
· Flexible parallel expansion & broad use cases: Supports modular, parallel scaling and multiple applications — PV self-consumption, peak shaving and energy arbitrage, load shifting, and backup power.
· Integrated intelligent EMS: Real-time data monitoring, remote diagnostics, fault early-warning and over-the-air software updates — simplifies O&M contracts and enables energy-performance monitoring.
· Safety-first design: Multi-level protection, early fire detection with automatic isolation interlocks, designed to meet commercial-grade safety standards and regulatory requirements.
| Model | CAS-60KM10UNAC |
| System Specifications | 60kW/101kWh |
| AC Parameters | |
| Rated Voltage | 230/400Vac |
| AC Access Method | 3P+N+PE |
| Rated Frequency | 50/60Hz |
| Rated Power | 60kW |
| Power Factor | -0.8~+0.8 |
| DC Parameters | |
| Rated Voltage | 844.8Vdc |
| DC Voltage Range | 739-950Vdc |
| Max. Continuous Current | 120A |
| General Parameters | |
| Operating Temperature | -20-50℃ (>45℃ derating) |
| Storage Temperature | -40-60℃ |
| Operating Humidity | 0%-95%RH, no condensation |
| Altitude | <2000m( 2000-4000m derating) |
| Protection Class | Class I |
| IP Rating | IP54 |
| Cooling Method | Intelligent Air Cooling |
| Fire Protection | PACK-level and cluster-level fire protection (aerosol) |
| Dimensions (W*D*H) | 1150*1335*2125mm |
| Net Weight | 2200kg |
| Peak Noise | 70dB |
Q1: What environments and power ranges are air-cooled systems suitable for?
A1: They are suitable for small-to-medium power applications within the specified cabinet operating temperature range. For projects in high-temperature areas or requiring high power density, liquid-cooling or hybrid cooling solutions are recommended.
Q2: What about noise and ventilation requirements?
A2: Air-cooled cabinets include fans and ventilation openings. Follow the installation manual for cabinet spacing and room ventilation. Measured noise levels are typically below 70 dB(A) at 1 meter under full load; please follow the installation manual for recommended cabinet clearances and ensure adequate ventilation to maintain optimal cooling performance.
Q3: Do these systems support grid-connected and island (off-grid) operation?
A3: Most C&I ESS platforms support grid-connected, island (off-grid) and hybrid control modes. Specify on the technical page which operating modes and certifications the PCS (power conversion system) supports, with fast transfer times and compliance with key interconnection standards such as IEEE 1547 and UL 1741.
Related Products
Inquiry
Copyright © Inventronics New Energy All Rights Reserved | Sitemap |
